TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE. (cont)
13-18.
Steering Console Hood and Panel Support. (Sheet 2 of 3)
REMOVAL
1.
Remove six bolts (1) and hood (2, Figure
13-59) from steering console.
2.
Remove four bolts (3) and bracket (4) in
steering console inside of cab.
3.
Position pump assembly (5) away from
console (10).
4.
Remove handle assembly (6), washer (7),
nut (8) and washer (9).
5.
Remove shaft (10) and console (11).
6.
Remove two bearings (12) from console
cover.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 13-59.
Go to Sheet 3
13-68
