TM 5-3805-261-20
STEERING MAINTENANCE.
11-1.
Steering Wheel and Control Pump Assembly. (Sheet 2 of 3)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open hydraulic
ports to prevent contamination.
1.
Disconnect hose assemblies (1, 2, 3 and 4,
Figure 11-1) from steering console inside
cab.
2.
Remove control pump assembly (5).
3.
Remove two connectors (6) and preformed
packings (7) from control pump assembly
(5, Figure 11-2). Discard two preformed
packings (7).
4.
Remove two connectors (8) and preformed
packings (9) from control pump assembly
(5). Discard two preformed packings (9).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 11-1
Figure 11-2
Go to Sheet 3
11-3