TM 5-3805-261-20
WHEELS AND TIRES MAINTENANCE.
10-4.
Wheels and Tires Removal. (Sheet 2 of 4)
REMOVAL
WARNING
Be sure the parking brake is set
before
beginning
this
task.
In
addition, block the wheel assembly
opposite the wheel assembly being
removed. Failure to do so may cause
the 130G Grader to slip off the jack
stand and may cause INJURY. If you
are
injured,
seek
medical
aid
immediately.
NOTE
The
following
is
a
maintenance
procedure for the right rear wheel
assembly.
The
maintenance
procedure for the remaining wheel
assembly is identical.
1.
Loosen ten nuts (1) and washers (2, Figure
10-1) on wheel assembly being removed.
Figure 10-1
Go to Sheet 3
10-5
