TM 5-3805-261-20
WHEELS AND TIRES MAINTENANCE.
10-4.
Wheels and Tires Removal. (Sheet 4 of 4)
INSTALLATION
1.
Install hoist and sling on wheel assembly
(Figure 10-1). Position wheel assembly.
2.
Install ten washers (2) and nuts (1).
3.
Using jack (3, Figure 10-2), lift vehicle and
remove jack stand.
4.
Lower wheel assembly to ground and
remove jack (3).
5.
Tighten ten nuts (1, Figure 10-1) evenly to
365 ft-lb torque.
6.
Remove hoist and sling.
NOTE
Check pressure of tire. Refer to TM
5-3805-261-10 for instructions and
safety measures.
Return 130G Grader to original
equipment condition.
End of Task
10-7 (10-8 blank)