TM 5-3805-261-20
WIRING HARNESS MAINTENANCE.
7-123.
Supplemental
Steering
Governor
Switch
Harness. (Sheet 2 of 3)
REMOVAL
1.
Remove two screws (1) and lockwashers
(2,
Figure
7-205)
from
supplemental
steering governor switch.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect governor switch harness (5)
from governor switch.
3.
Cut and discard tie strap (3).
4.
Disconnect governor switch harness (5)
from main harness.
5.
Remove clip (4).
6.
Remove governor switch harness (5).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-205
Go to Sheet 3
7-321
