TM 5-3805-261-20
ELECTRICAL SYSTEM.
7-108.
Battery STE/ICE Tests.
a.
TEST 67. BATTERY VOLTAGE
1.
Refer to VTM General Setup and Checkout Instructions in TM 9-4910-571-12 & P. Connect power
cables to battery (Figure 6-4).
Figure 6-4
2.
Attach lead clips (Figure 7-161). Red lead clip is on right battery positive terminal and black lead clip is
on left battery negative terminal. Make sure that the electrical contacts are clean.
Figure 7-161
3.
Perform test using procedure TEST 67 as instructed in TM 9-4910-571- 12 & P.
4.
Battery voltage should be between 26.5-29.5 volts. Take corrective action if necessary.
5.
Return vehicle to its original condition.
7-261
