TM 5-3805-261-20
LIGHT SYSTEM MAINTENANCE. (cont)
7-87.
Dome Light. (Sheet 2 of 3)
REMOVAL
1.
Remove two screws (1) and door assembly
(2, Figure 7-134) from upper, right cab
interior.
2.
Remove lamp (3).
3.
Remove three screws (4).
4.
Remove housing (6) from interior frame.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
5.
Disconnect wire assembly (5) at terminal.
6.
Remove housing (6).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-134
Go to Sheet 3
7-214
