TM 5-3805-261-20
LIGHT SYSTEM MAINTENANCE.
7-82.
Front Blackout Light. (Sheet 2 of 4)
REMOVAL
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
1.
Disconnect wire assembly (4, Figure 7-115)
at terminal from front of vehicle.
2.
Remove and discard two straps (1).
3.
Remove nut (2) and lockwasher (3).
4.
Disconnect and remove wire assembly (4)
at connector from body assembly (17).
5.
Remove items 10 thru 17 as an assembly
from tube (9, Figure 7-116).
6.
Remove four nuts (5), washers (6), two
brackets (7), U-bolts (8) and tube (9).
Figure 7-115
Figure 7-116
Go to Sheet 3
7-196