TM 5-3805-261-20
LIGHT SYSTEM MAINTENANCE.
7-82.
Front Blackout Light. (Sheet 3 of 4)
DISASSEMBLY
1.
Remove washers (10 and 11) from body
assembly (17, Figure 7-117).
2.
Loosen three screws (12). Three screws
(12)
cannot
be
removed
from
door
assembly (13).
3.
Remove door assembly (13).
4.
Remove and discard gasket (14) and
preformed packing (15). Remove all
gasket material from mounting surfaces.
5.
Remove lamp (16) from body assembly
(17).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
ASSEMBLY
1.
Install lamp (16) in body assembly (17,
Figure 7-117).
2.
Position new preformed packing (15) and
new gasket (14).
3.
Position door assembly (13) on body
assembly (17).
4.
Tighten three screws (12).
5.
Install washers (11 and 10).
Figure 7-117
Go to Sheet 4
7-197
