TM 5-3805-261-20
SUPPLEMENTAL STEERING MAINTENANCE. (cont)
7-51.
Pump Motor Mounting.
REMOVAL
1.
Open left side engine door.
2.
Remove nut (1), washer (2) and bolt (3)
from bracket (10, Figure 7-70) in front, left
side of engine.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
3.
Remove clip (4) from two wire assemblies (5).
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends to prevent contamination.
4.
Remove clip (6) from hose assembly (7).
5.
Remove two bolts (8), washers (9), bracket
(10) and plate (11, Figure 7-71).
6.
Remove bolt (12), washer (13) and brace
(14).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-70
Figure 7-71
Go to Sheet 3
7-130
