TM 5-3805-261-20
SUPPLEMENTAL STEERING MAINTENANCE. (cont)
7-50.
Pump Motor. (Sheet 3 of 3)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Position motor assembly (15) on bracket
(16, Figure 7-69) in front, left side of
engine compartment.
2.
Install washer (14), bolt (13), three bolts
(12), washers (11) and four nuts (10).
3.
Position coupler (9), new gasket (8) and
pump assembly (7) on motor assembly
(15, Figure 7-68).
4.
Install four lockwashers (6) and bolts (5).
5.
Connect wire assemblies (4 and 3,
Figure 7-67).
6.
Install two lockwashers (2) and nuts (1).
7.
Close left side engine door.
NOTE
Return 130G Grader to original
equipment condition.
Figure 7-69
Figure 7-68
Figure 7-67
End of Task
7-128
