TM 5-3805-261-20
CAB SWITCH PANEL MAINTENANCE. (cont)
7-43.
Switch Panel and Mounting. Sheet 3 of 3)
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install barrel (25) in lighter housing (26,
Figure 7-59).
2.
Connect wire assembly (24).
3.
Install washer (23) and screw (22).
4.
Install switches (21 and 20, Figure 7-58).
5.
Install bracket (19), nuts (18 and 17), two
bolts (16), washers (15) and nuts (14).
6.
Install plug (13), lamp housing (12), seal
(11), washer (10) and nut (9) on switch
panel (6, Figure 7-57).
7.
Connect two wire assemblies (8) to lamp
housing (12).
8.
Install grommet (7).
9.
Connect
two
wire
assemblies
(8)
at
grommet (7).
10.
Install two screws (5), lighter knob (4), lamp
(3), lamp hood (2) and two knobs (1) on
switch panel (6) on right side of cab.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 7-59
Figure 7-58
Figure 7-57
End of Task
7-110