REMOVAL - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
372

TM 5-3805-261-20 CAB SWITCH PANEL MAINTENANCE. 7-43. Switch Panel and Mounting. (Sheet 2 of 3) REMOVAL 1. Remove two knobs (1), lamp hood (2), lamp (3), lighter knob (4) and two screws (5) from switch panel (6, Figure 7-57) on right side of cab. 2. Remove switch panel (6). NOTE All wire, cable and harness assemblies must be tagged before disconnecting to aid in installation. 3. Disconnect two wire assemblies (8) at grommet (7). 4. Remove grommet (7). 5. Remove two wire assemblies (8) from lamp housing (12). 6. Remove nut (9), washer (10), sea (11), lamp housing (12) and plug (13). 7. Remove two nuts (14), washers (15), bolts (16), nuts (17 and 18) and bracket, (19, Figure 7-58). 8. Remove switches (20 and 21). 9. Remove screw (22) and washer (23, Figure 7-59). 10. Disconnect wire assembly (24). 11. Remove barrel (25) from lighter housing (26). CLEANING Clean all parts. Refer to Chapter 2. Go to Sheet 4 Figure 7-57 Figure 7-58 Figure 7-59 7-109

Privacy Statement
Press Release
Contact