TM 5-3805-261-20
STEERING CONTROL CONSOLE MAINTENANCE. (cont)
7-22.
Turn Signal Switch. (Sheet 2 of 2)
REMOVAL
1.
Remove steering console hood. Refer to
paragraph 13-18, step 1.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect three wire assemblies (1, Figure
7-38) from steering control console.
3.
Remove three nuts (2), washers (3), bolts
(4) and switch (5) from steering control
console (6).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install switch (5), three bolts (4), washers
(3) and nuts (2) in steering control console
(6, Figure 7-38).
2.
Connect three wire assemblies (1). Make
sure connections are clean and free of
corrosion.
3.
Install steering console hood. Refer to
paragraph 3-18, step 7.
NOTE
Return
1300
Grader
to
original
equipment condition.
Figure 7-38.
End of Task
7-66
