TM 5-3805-261-20
COOLING SYSTEM MAINTENANCE. (cont)
6-40.
Radiator Hoses, Lines and Fittings. (Sheet 2
of 6)
REMOVAL
1.
Remove bolt (1), washer (2) and clip (3,
Figure 6-98) from front, upper left of fuel
tank.
2.
Loosen two clamps (4).
NOTE
All hose and tube assemblies must be
tagged before disconnecting to aid in
installation. Cap all hose and tube
ends and plug all open ports to
prevent contamination.
3.
Disconnect hose (7) from temperature
regulator housing and slide up on tube (6).
4.
Remove two clamps (4).
5.
Loosen two clamps (5).
6.
Disconnect hose (8) and slide up on tube
(6).
7.
Remove two clamps (5).
8.
Remove tube (6) with hoses (7 and 8)
connecting radiator to temperature regulator
housing.
9.
Remove hoses (7 and 8) from tube (6).
Figure 6-98.
Go to Sheet 3
6-138
