TM 5-3805-261-20
FUEL SYSTEM MAINTENANCE.
6-24.
Fuel Tank. (Sheet 4 of 8)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends to prevent contamination.
5.
Disconnect hose assembly (5, Figure 6-61)
in front, upper right side of fuel tank.
6.
Remove elbow (6) and bushing (7).
7.
Remove hose assembly (8) from lower,
right side of fuel tank.
8.
Remove connector (9) and valve (10).
9.
Remove bolt (11), washer (12) and clip (13,
Figure 6-62) from tube (16) in front, top left
side of fuel tank.
10.
Loosen two clamps (14) in front, top left
side of radiator.
11.
Disconnect hose (17) by sliding off neck of
radiator (29).
12.
Remove two clamps (14).
13.
Loosen two clamps (15) from front, top of
engine.
14.
Disconnect hose (18) by sliding off neck of
temperature regulator housing.
15.
Remove two clamps (15).
16.
Remove tube (16) from vehicle.
17.
Remove hoses (17 and 18) from tube (16).
Figure 6-61.
Figure 6-62.
Go to sheet 5
6-87
