TM 5-3805-261-20
FUEL SYSTEM MAINTENANCE.
6-17.
Primary Element. (Sheet 3 of 4)
CLEANING
WARNING
Compressed
air
used
for
cleaning
purposes will not exceed 30 psi. Use
only with effective chip guarding and
personal
protective
equipment
(goggles/shield, gloves, etc.)
1.
Clean
filter
element
(4).
Use
compressed air. Directing the air
pressure away from you, blow dirt
outward from center and then direct
air inward through filter screen to
remove dirt.
2.
Clean all other parts. Refer to Chapter
2.
INSPECTION
NOTE
Manufacturer’s
specifications
call
for
replacement of filter element after six
cleanings and replacement of secondary
filter
after
three
cleanings
of
filter
element. Refer to paragraph 6-12e.
Inspect all parts. Refer to Chapter 2.
Go to Sheet 4
6-61
