TM 5-3805-261-20
FUEL SYSTEM MAINTENANCE.
6-15.
Injection Lines. (Sheet 4 of 6)
INSTALLATION
5.
Install four clamps (11) on injection line
assemblies (15 and 14, Figure 6-35).
6.
Install two screws (10).
7.
Tighten injection line assemblies (15
and 14) at injection pump only.
8.
Install bracket (9) and two clamps (8,
Figure 6-34).
9.
Install screw (7).
10.
Connect and tighten injection line
assemblies (6 AND 5, Figure 6-33) to
injection nozzles.
11.
Install washer (4) and bolt (3).
12.
Tighten injection line assemblies (6
and 5) at injection pump.
13.
Install four clamps (2) and two screws
(1) on injection line assemblies (6 and
5).
Go to Sheet 5
Figure 6-35.
Figure 6-34.
Figure 6-33.
6-53
