TM 5-3805-261-20
BLADE MAINTENANCE.
17-7.
Circle Drive Swivel Assembly. (Sheet 5 of 7)
INSTALLATION
6.
Install pin (27) through holes in guide
assembly and circle drive swivel assembly
(30, Figure 17-29).
7.
Install two washers (26) and new cotter pins
(25).
8.
Install new preformed packing (24) and
elbow (23, Figure 17-28).
9.
Connect hose assembly (22).
10.
Install new preformed packing (21) and
elbow (20, Figure 17-27).
11.
Connect hose assembly (19).
12.
Install new preformed packing (18) and
elbow (17).
13.
Connect hose assembly (16).
14.
Install new preformed packing (15) and
connector (14, Figure 17-26).
15.
Connect hose assembly (13).
16.
Install new preformed packing (12) and
connector (11).
17.
Connect hose assembly (10).
Figure 17-27.
Figure 17-29.
Figure 17-28.
Figure 17-26.
Go to Sheet 6
17-23
