REMOVAL (cont.) - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
1105

TM 5-3805-261-20 BLADE MAINTENANCE. 17-7. Circle Drive Swivel Assembly. (Sheet 3 of 7) REMOVAL 11. Disconnect hose assembly (16, Figure 17- 27). 12. Remove elbow (17) and preformed packing (18). Discard preformed packing (18). 13. Disconnect hose assembly (19). 14. Remove elbow (20) and preformed packing (21). Discard preformed packing (21). 15. Disconnect hose assembly (22, Figure 17- 28). 16. Remove elbow (23) and preformed packing (24). Discard preformed packing (24). 17. Remove two cotter pins (25), washers (26) and pin (27, Figure 17-29). Discard two cotter pins (25). WARNING Weight of circle drive swivel assembly is approximately 70 lbs. Use adequate hoist and sling to perform this task. Failure to do so may cause INJURY. If you are injured, seek medical aid immediately. 18. Install two 9/16-18 thread eyebolts into circle drive swivel assembly (30, Figure 17- 30). 19. Attach hoist and sling to eyebolts. Take up slack in hoist and sling. Figure 17-27. Figure 17-30. Go to Sheet 4 Figure 17-28. Figure 17-29. 17-21

Privacy Statement
Press Release
Contact