TM 5-3805-261-20
BLADE MAINTENANCE. (cont.)
17-7.
Circle Drive Swivel Assembly. (Sheet 2 of 7)
REMOVAL
NOTE
Blade must be horizontal to cab.
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open hydraulic
ports to prevent contamination.
1.
Disconnect hose assembly (1, Figure 17-
24).
2.
Remove elbow (2) and preformed packing
(3). Discard preformed packing (3).
3.
Disconnect hose assembly (4).
4.
Remove elbow (5) and preformed packing
(6). Discard preformed packing (6).
5.
Disconnect hose assembly (7, Figure 17-
25).
6.
Remove elbow (8) and preformed packing
(9). Discard preformed packing (9).
7.
Disconnect hose assembly (10, Figure 17-
26).
8.
Remove connector (11) and preformed
packing (12). Discard preformed packing
(12).
9.
Disconnect hose assembly (13).
10. Remove connector (14) and preformed
packing (15). Discard preformed packing
(15).
Figure 17-26.
Go to Sheet 3
17-20
Figure 17-25.
Figure 17-24.