TM 5-3805-261-20
BLADE MAINTENANCE. (cont.)
17-7.
Circle Drive Swivel Assembly. (Sheet 4 of 7)
REMOVAL (cont.)
20.
Remove four bolts (28), washers (29) and
circle drive swivel assembly (30, Figure 17-
31).
21.
Remove hoist and sling and two 9/16-18
thread eyebolts.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install two 9/16-18 thread eyebolts into
circle drive swivel assembly (30, Figure 17-
30).
2.
Attach hoist and sling to eyebolts.
3.
Position circle drive swivel assembly (30) in
drawbar yoke, alining holes for four bolts
(28, Figure 17-31).
4.
Install four washers (29) and bolts (28).
5.
Remove hoist and sling and two 9/16-18
thread eyebolts.
Figure 17-31.
Figure 17-30.
Go to Sheet 5
17-22