TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-17.
Hydraulic Control Valve Group. (Sheet 2 of 12)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and
plug
all
opened
hydraulic
ports
to
prevent
contamination.
1.
Disconnect two hose assemblies (1, Figure
15-26) under front, right side of cab.
2.
Remove
tee
(2),
connector
(3)
and
preformed packing (4). Discard preformed
packing (4).
3.
Disconnect five hose assemblies (5, 6, 7, 8
and 9).
4.
Remove
two
connectors
(10)
and
preformed packings (11, Figure 15-27).
Discard two preformed packings (11).
5.
Remove
two
connectors
(12)
and
preformed packings (13). Discard two
preformed packings (13).
6.
Remove
two
connectors
(14)
and
preformed packings (15). Discard two
preformed packings (15).
7.
Remove two elbows (16) and preformed
packings (17). Discard two preformed
packings (17).
8.
Remove two elbows (18) and preformed
packings (19). Discard two preformed
packings (19).
Figure 15-26.
Figure 15-27.
Go to Sheet 3
15-59
