TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-17.
Hydraulic Control Valve Group. (Sheet 6 of 12)
REMOVAL
28.
Remove bolt (67) and washer (68, Figure
15-34).
NOTE
Step 29 requires two mechanics.
Weight
of
valve
group
is
approximately 85 lbs.
29.
One mechanic removes two bolts (69),
washers (70) and mountings (71), while
second mechanic holds valve group items
72 thru 79 as an assembly.
30.
Remove items 72 thru 79 as an assembly.
31.
Remove three bolts (72), washers (73) and
bracket (74) from valve group (79, Figure
15-35).
32.
Remove bolt (75), washer (76), mounting
(77) and bracket (78) from valve group (79).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 15-34.
Figure 15-35.
Go to Sheet 7
15-63