TM 5-3805-261-10
SECTIONALIZATION FOR AIR TRANSPORT - CONTINUED
0019 00
ASSEMBLY - CONTINUED
NOTE
During retainer installation, position two bolts through holes to hold and align the shims.
33.
Install shims, retainer (56), and six bolts (25) on bottom of lower pivot pin (26). Gradually tighten bolts in a diagonal
pattern.
56
SHIMS (HIDDEN)
397-1101
26
25
34.
Install cap (24), three washers (23), and bolts (22) on bottom of lower pivot pin (26). Tighten bolts to 100 lb-ft
(135 Nm).
24
22,23
397-1069
35.
If required, adjust the screw jacks for top pivot pin hole alignment.
0019 00-28
