TM 5-3805-261-10
ADVANCED OPERATION AND OPERATOR TIPS - CONTINUED
0006 00
TRAVELING AND EARTH MOVING OPERATIONS - CONTINUED
Flat Bottom Ditching - Continued
6.
Lower the right lift cylinder to set the depth of the cut.
397-1012
7.
Raise the left lift cylinder to set the desired shoulder
slope.
8.
Lean the front wheels to the left. Cut the second "V"
ditch to the same depth or slightly above the first one.
397-1013
9.
Cut a flat bottom. Set the right lift cylinder to the
required depth.
397-1014
0006 00-25
