NOTES:
1.
FOR OPERATION OF EQUIPMENT IN
PROTBACTED COLD TEMPERATURES BELOW
Remove lubricants
-10F (-23C).
prescribed in the key for tempera-
o
tures above -10 F (123C).
Clean
parts with dry cleaning solvent.
Relubricate with lubricants speci-
fied in the key for temperatures 0F
to -65F.
After installing
2.
OIL FILTER.
new filter element, fill crankcase,
operate engine 5 minutes and check
Check crankcase
housing for leaks.
oil level and bring to FULL mark.
filter
Oil
replacement
interval
shall aline with on-condition AOAP
analysis or hard time oil change
requirement. Replace at hard time
regardless of oil analysis re-
sults.
3.
OIL CAN POINTS.
Every 100
hours lubricate the door hinges,
latches, control linkages and all
threads
with
exposed
adjusting
OE-HDO.
4.
CRANKCASE.
Check crankcase
level with the engine in a static
condition.
CRANKCASE OIL. A sample of the
5.
oil shall be sent to an
AOAP
laboratory for
snalysis at an
intervsl of 50 hours or 60 days.
Refer to TB 43-0210 for sampling
requirements.
6.
When AOAP laboratory support is
not available,
drain and refill
crankcase oil at 250 service hours
or every three months, whichever
comes first.
Copy of this Lubrication Order will
remain with the equipment at all
times. Instructions contained herein
are mandatory.
LO 5-3805-261-12
Card 29 of 30
