COMPRESSED AIR HAZARD
Compressed
air
used
for
cleaning purposes will not
exceed 30 PSI.
Use only
with effective chip guarding
and
personal
protective
equipment
(goggles/shield,
gloves, etc.)
Clean filter housing and base with SD-
II.
Dry thoroughly with compressed
air.
Install
new
fliter
element
in
housing.
Do not tighten with nut on
bottom of housing.
Install
filter
housing.
Band
tighten only.
Turn one additional
turn
after
filter
housing
3/4
contacts bare.
Start engine. When oil is at oper-
ating temperature, check oil level
on transmission dipstick (18).
Oil
level should be in OPERATING RANGE.
Add oil, if necessary.
Inspect for
leaks. Stop engine.
Card 20 of 30
QUARTERLY (Cont)
LO 5-3805-261-12
