17.
(0)
Hot oilcan cause burns and
SERIOUS INJURY.
Use care
when draining hot oil and
changing filters.
Place suitable container under drain
valve (15).
Open valve and allow
Dry cleaning solvent (P-D-
680) used to clean parts is
toxic and flamnable.
Use
only in
well
ventilated
areas.
Wear
protective
goggles and gloves.
Do not
smoke or allow open flames
or sparks in areas where
Cleaning solvent is used or
stored.
Avoid contact with
eyes, skin or clothing. If
contact is made, flush with
cold water and seek medical
attention.
If you become
dizzy while using cleaning
solvent,
fresh
air
get
immediately.
Remove used filter (16).
Clean
filter base with SD-II. Be sure all
of old seal is removed.
Do
not
overtighten
the
filter.
NOTE
The filter may have index
marks
spaced
90 degrees
apart.
These marks should
be used when tightening a
new filter an additional
3/4 turn more.
Card 12 of 30
MONTHLY (Cont)
LO 5-3805-261-12