14.
TANDEM DRIVE HOUSINGS (0)
NOTE
The vehicle must be parked
on level ground with all
lowered to the
equipment
and
off
engine
ground,
parking brake applied before
performing this procedure.
Check oil level when dipstick (20)
has been screwed down finger tight
and then removed. If necessary, add
oil until level is at FULL mark.
Repeat this procedure for the tandem
drive housing on the other side of
the vehicle.
BLADE LIFT CYLINDERS (0)
15.
Lubricate two fittings (21), one on
each cylinder with MPG.
16.
CENTERSHIFT CYLINDER (0)
Lubricate
two fittings (22) with
MPG.
Card 11 of 30
MONTHLY (Cont)
LO 5-3805-261-12
