TM 5-3805-293-23-5
0331
COOLANT HEATER INSTALLATION CONTINUED
000331
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
N OT E
Position elbow fitting and adapter at an angle to install tee fitting as shown in Figure 45.
39. Apply sealing compound and install elbow fitting (Figure 45, Item 2) on front cover (Figure 45, Item 1).
40. Apply sealing compound and install adapter (Figure 45, Item 3) on elbow fitting (Figure 45, Item 2).
41. Apply sealing compound and install tee fitting (Figure 45, Item 4) on adapter (Figure 45, Item 3).
42. Tighten elbow fitting (Figure 45, Item 2) on front cover (Figure 45, Item 1) to vertical position.
Figure 45. 90 Degree Elbow, Adapter, and Tee Fitting.
0331
