TM 5-3805-293-23-4
0273
REMOVAL CONTINUED
6. Remove bolt (Figure 3, Item 6), washer (Figure 3, Item 7), and two clamps (Figure 3, Item 8) from cab
(Figure 3, Item 1).
7. Remove locknut (Figure 3, Item 14), washer (Figure 3, Item 13), and three clamps (Figure 3, Item 15) from cab
(Figure 3, Item 1). Discard locknut.
8. Remove A/C hose (Figure 3, Item 2) and O-ring (Figure 3, Item 19) from refrigerant accumulator (Figure 3,
Item 20). Discard O-ring.
9. Remove A/C hose (Figure 3, Item 16) and O-ring (Figure 3, Item 17) from receiver dryer (Figure 3, Item 18).
Discard O-ring.
10. Loosen two clamps (Figure 3, Item 4) and remove heater hoses (Figure 3, Item 5) from cab fittings (Figure 3,
Item 3).
11. Remove two bolts (Figure 3, Item 12), washers (Figure 3, Item 11), and bracket (Figure 3, Item 10) from
bracket (Figure 3, Item 9).
Figure 3. Climate Control Hoses.
0273
Change 1