TM 5-3805-293-23-4
0273
CLEANING AND INSPECTION
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
1. Attach slings and lifting device to top of cab.
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Cab weighs 2,800 lb (1,270 kg).
2. Using lifting device, install cab on machine.
3. Install four bottom resilient mounts (Figure 8, Item 3), washers (Figure 8, Item 2), and bolts (Figure 8, Item 1)
on brackets (Figure 8, Item 4). Torque bolts to 580 lb-ft (786 Nm).
4. Remove lifting device and slings from cab.
0273-9
Change 1