TM 5-3805-293-23-4
0254
REMOVAL CONTINUED
000254
18. Disconnect tube (Figure 7, Item 2) from rear valve (Figure 7, Item 3), and remove O-ring (Figure 7, Item 1).
Discard O-ring.
Figure 7. Tube and Rear Valve Bank.
0254
END OF TASK
CLEANING AND INSPECTION
000254
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
000254
N OT E
Install all lines as tagged during removal.
1. Position tube (Figure 7, Item 2) on machine. Install new O-ring (Figure 7, Item 1) and connect tube to rear
valve (Figure 7, Item 3).