TM 5-3805-293-23-4
0253
REMOVAL CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Tag hoses to aid in installation.
Plug and cap hydraulic lines to prevent le kage and contamination of hydraulic fluid.
a
Shims are installed on articulation cylinder as required and may not be present on
machine.
4. Disconnect hydraulic hose (Figure 3, Item 8) and remove O-ring (Figure 3, Item 9) from right articulation
cylinder (Figure 3, Item 1). Discard O-ring.
5. Disconnect hydraulic hose (Figure 3, Item 10) and remove O-ring (Figure 3, Item 11) from right articulation
cylinder (Figure 3, Item 1). Discard O-ring.
6. Remove bolt (Figure 3, Item 6), cotter pin (Figure 3, Item 2), washer (Figure 3, Item 7), spacer (Figure 3,
Item 5), pin (Figure 3, Item 4), and shims (Figure 3, Item 3) from front frame. Discard cotter pin.
Figure 3. Front Articulation Cylinder Pin.
0253