TM 5-3805-293-23-4
0237
REMOVAL CONTINUED
N OT E
The procedure to remove each circuit breaker is the same; repeat steps as required.
8. Remove nut (Figure 4, Item 8), washer (Figure 4, Item 7), wire (Figure 4, Item 2), and lockwasher (Figure 4,
Item 6) from circuit breaker (Figure 4, Item 1). Discard lockwasher.
9. Remove two screws (Figure 4, Item 4), lockwashers (Figure 4, Item 5), and circuit breaker (Figure 4, Item 1)
from upper cover (Figure 4, Item 3). Discard lockwashers.
0237
10. Remove nut (Figure 5, Item 8), washer (Figure 5, Item 7), cable (Figure 5, Item 1), and lockwasher (Figure 5,
Item 6) from circuit breaker (Figure 5, Item 3). Discard lockwashers.
11. Remove two screws (Figure 5, Item 5), washers (Figure 5, Item 4), and circuit breaker (Figure 5, Item 3) from
upper cover (Figure 5, Item 2).
0237