TM 5-3805-293-23-4
0233
REMOVAL
000233
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Tag wires to aid in installation.
1. Disconnect electrical connector (Figure 1, Item 5) from starter wiring harness (Figure 1, Item 4).
2. Remove accumulator pressure sensor (Figure 1, Item 3) and O-ring (Figure 1, Item 2) from brake and fan
control manifold (Figure 1, Item 1). Discard O-ring.
Figure 1. Pressure Sensor.
0233
END OF TASK