TM 5-3805-293-23-4
0232
REMOVAL CONTINUED
18. Remove nut (Figure 9, Item 1), two washers (Figure 9, Item 9), clamps (Figure 9, Item 8) and bolt (Figure 9,
Item 7) from hoses (Figure 9, Item 10).
19. Remove bolt (Figure 9, Item 5), washer (Figure 9, Item 4), two clamps (Figure 9, Item 6) and spacer (Figure 9,
Item 3) from hydraulic service pack base (Figure 9, Item 2).
20. Disconnect hose (Figure 9, Item 11) and remove O-ring (Figure 9, Item 12) from tee (Figure 9, Item 13).
Discard O-ring. Remove hose from machine.
Figure 9. All-Wheel Drive Pump.
0232