TM 5-3805-293-23-4
0226
REMOVAL CONTINUED
N OT E
The procedure to remove top corner panel is identical for left and right. The right side top
corner panel is shown in this procedure.
Tag and mark wires and connectors to aid in installation.
9. Disconnect rear lamp harness connector (Figure 13, Item 7) from rear backup lamp connector (Figure 13,
Item 8).
10. Remove rear backup lamp connector (Figure 13, Item 8) from clip (Figure 13, Item 5).
11. Remove nut (Figure 13, Item 3), washer (Figure 13, Item 4) and two clips (Figure 13, Item 2 and 5) from rear
backup lamp (Figure 13, Item 6).
12. Remove two nuts (Figure 13, Item 10), washers (Figure 13, Item 9) and rear backup lamp (Figure 13, Item 6)
from top corner panel (Figure 13, Item 1).
Figure 13. Rear Backup Lamp.
0226