TM 5-3805-293-23-4
0225
CLEANING AND INSPECTION
000225
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
000225
1. Attach slings to hand rails (Figure 16, Items 3 and 6) and attach lifting device to engine enclosure.
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
N OT E
Engine enclosure weighs 670 lb (304 kg).
2. Open side doors to allow observation in guiding installation. Using lifting device, install engine enclosure on
machine.
3. Remove lifting device and slings from engine enclosure.
4. Install eight washers (Figure 17, Item 2) and bolts (Figure 17, Item 1) on engine enclosure (Figure 17, Item 3).
0225