TM 5-3805-293-23-4
0225
REMOVAL CONTINUED
N OT E
Tag and mark all hoses and harnesses to aid in installation.
20. Remove grommet (Figure 13, Item 4) from enclosure panel (Figure 13, Item 3) and push fuel supply hose
(Figure 13, Item 8) through enclosure panel. Position fuel supply hose aside.
21. Remove grommet (Figure 13, Item 5) from enclosure panel (Figure 13, Item 3) and push arctic heater harness
(Figure 16, Item 7) through enclosure panel. Position arctic heater harness aside.
22. Remove four bolts (Figure 13, Item 1) and washers (Figure 13, Item 2) from enclosure panel (Figure 13,
Item 3).
23. Remove enclosure panel (Figure 13, Item 3) from engine enclosure (Figure 13, Item 9).
24. Feed two heater hoses (Figure 13, Item 6) through engine enclosure panel (Figure 13, Item 3). Position heater
hoses aside.
25. Install enclosure panel (Figure 13, Item 3) on enclosure (Figure 13, Item 9).
26. Install four washers (Figure 13, Item 2) and bolts (Figure 13, Item 1) on enclosure panel (Figure 13, Item 3).
Figure 13. Arctic Heater Hose.
0225