TM 5-3805-293-23-4
0218
FRONT VALVE BANK CONTINUED
Centershift Circuit
1. Shut off machine (TM 5-3805-293-10).
2. Slowly turn centershift lock valves (Figure 3, Item 2) three complete turns. Allow pressure to release.
3. Remove two centershift lock valves (Figure 3, Item 2) and O-rings (Figure 3, Item 3) from manifold (Figure 3,
Item 1). Discard O-rings.
4. Install new O-rings (Figure 3, Item 3) on two centershift lock valves (Figure 3, Item 2). Install centershift lock
valves on manifold (Figure 3, Item 1). Torque to 59 11 lb-ft (80 15 Nm).
Figure 3. Centershift Circuit.
0218
END OF TASK
Change 1