TM 5-3805-293-23-4
0212
REMOVAL CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Tag and mark lines to aid in installation.
42. Remove eight bolts (Figure 17, Item 5), washers (Figure 17, Item 4), and four clamps (Figure 17, Item 2) from
two tubes (Figure 17, Item 6).
43. Disconnect two tubes (Figure 17, Item 6) and remove two O-rings (Figure 17, Item 3) from pump (Figure 17,
Item 1). Discard O-rings.
44. Remove two tubes (Figure 17, Item 6) from machine.
Figure 17. AWD Pump Right-Side Hose-to-Tube Connections.
0212
END OF TASK
CLEANING AND INSPECTION
000212
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK