TM 5-3805-293-23-4
0211
REMOVAL CONTINUED
41. Remove two bolts (Figure 17, Item 1) and washers (Figure 17, Item 5) from plate (Figure 17, Item 6).
42. Remove bolt (Figure 17, Item 2), washer (Figure 17, Item 3), and bracket (Figure 17, Item 4) from machine.
43. Position plate (Figure 17, Item 6) and wiring harness aside.
44. Disconnect tube (Figure 17, Item 7) from rear valve (Figure 17, Item 11), and remove O-ring (Figure 17,
Item 13). Discard O-ring.
45. Disconnect tube (Figure 17, Item 10) from rear valve (Figure 17, Item 11), and remove O-ring (Figure 17,
Item 12). Discard O-ring.
46. Disconnect tube (Figure 17, Item 8) from rear valve (Figure 17, Item 11), and remove O-ring (Figure 17,
Item 9). Discard O-ring.
Figure 17. Rear Valve Tubes and Plate.
0211
Change 1