TM 5-3805-293-23-4
0211
REMOVAL CONTINUED
N OT E
If performing task on machine with serial number prefix CBS, perform steps 25 through 29.
If performing task on machine with serial number prefix RMY, perform steps 30 through
34.
Note the location of tube blocks to aid in installation.
25. Remove four bolts (Figure 13, Item 4), locknuts (Figure 13, Item 1), and eight washers (Figure 13, Item 2) from
two plates (Figure 13, Item 3). Discard locknuts.
26. Position two plates (Figure 13, Item 3) and wiring harnesses aside.
27. Remove two blocks (Figure 13, Items 5 and 12) from tubes (Figure 13, Items 8, 9, 10, and 11).
28. Remove four tubes (Figure 13, Items 8, 9, 10, and 11) from blocks (Figure 13, Items 6 and 7) and machine.
29. Remove two blocks (Figure 13, Items 6 and 7) from tubes.
Figure 13. Front and Middle Tube Plates and Blocks (Serial Number Prefix CBS).
0211
Change 1