TM 5-3805-293-23-4
0208
REMOVAL CONTINUED
5. Remove hydraulic oil filter element (Figure 2, Item 1) from hydraulic oil filter housing (Figure 2, Item 3).
6. Remove O-ring (Figure 2, Item 2) from hydraulic oil filter housing (Figure 2, Item 3). Discard O-ring.
0208
END OF TASK
CLEANING AND INSPECTION
000208
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
000208
1. Install new O-ring (Figure 2, Item 2) on hydraulic oil filter housing (Figure 2, Item 3).
2. Install hydraulic oil filter element (Figure 2, Item 1) in hydraulic oil filter housing (Figure 2, Item 3).