TM 5-3805-293-23-4
0205
N OT E
The procedure for front flood lamp replacement is identical for left and right front flood
lamps. Left front flood lamp is shown in this procedure.
REMOVAL
000205
1. Disconnect harness connector (Figure 1, Item 12) from front flood lamp assembly (Figure 1, Item 1).
2. Remove bolt (Figure 1, Item 2), locknut (Figure 1, Item 7), two washers (Figure 1, Item 3), and flood lamp
assembly (Figure 1, Item 1) from mount (Figure 1, Item 6). Discard locknut.
3. Remove locknut (Figure 1, Item 4), washer (Figure 1, Item 5), and mount (Figure 1, Item 6) from bracket
(Figure 1, Item 8). Discard locknut.
4. Remove two bolts (Figure 1, Item 9), washers (Figure 1, Item 10), wire loom retainer (Figure 1, Item 11), and
bracket (Figure 1, Item 8) from front frame.
Figure 1. Front Flood Lamp.
0205
END OF TASK