TM 5-3805-293-23-4
0193
REMOVAL CONTINUED
000193
N OT E
Tag and mark wires to aid in installation.
2. Remove nut (Figure 2, Item 2), washer (Figure 2, Item 3), and ground strap (Figure 2, Item 1) from battery
disconnect switch (Figure 2, Item 7).
3. Remove nut (Figure 2, Item 4), washer (Figure 2, Item 5), and two ground cables (Figure 2, Item 6) and battery
disconnect switch (Figure 2, Item 7) from hydraulic service pack (Figure 2, Item 8).
Figure 2. Battery Disconnect Switch.
0193
END OF TASK
CLEANING AND INSPECTION
000193
1. Clean and inspect all mechanical components IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical components IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK
INSTALLATION
000193
N OT E
Install wires as tagged during removal.
1. Install battery disconnect switch (Figure 2, Item 7), two ground cables (Figure 2, Item 6), washer (Figure 2,
Item 5) and nut (Figure 2, Item 4) on hydraulic service pack (Figure 2, Item 8).
2. Install ground strap (Figure 2, Item 1), washer (Figure 2, Item 3), and nut (Figure 2, Item 2) on battery
disconnect switch (Figure 2, Item 7).