TM 5-3805-293-23-4
0190
INSTALLATION
000190
1. Connect hydraulic valve wiring harness connector (Figure 4, Item 10) to main rear wiring harness connector
(Figure 4, Item 11).
2. Install harness clip (Figure 4, Item 12), washer (Figure 4, Item 13), and bolt (Figure 4, Item 9) on bracket
(Figure 4, Item 8).
3. Connect hydraulic valve wiring harness connector (Figure 4, Item 7) to pressure sensor pigtail (Figure 4,
Item 5).
4. Install two clips (Figure 4, Item 6), washer (Figure 4, Item 2), nut (Figure 4, Item 3), and bolt (Figure 4, Item 4)
on implement steering control manifold (Figure 4, Item 1).
Figure 4. Hydraulic Valve Wiring Harness.
0190