TM 5-3805-293-23-4
0187
REMOVAL CONTINUED
16. Remove two nuts (Figure 7, Item 1), washers (Figure 7, Item 2), eyelets (Figure 7, Item 4), and lockwashers
(Figure 7, Item 3) from secondary steering relay (Figure 7, Item 5). Discard lockwashers.
N OT E
Note locations of washers prior to removal to aid in installation.
17. Remove four bolts (Figure 7, Item 8), washers (Figure 7, Item 7), two clips (Figure 7, Item 6), and secondary
steering relay (Figure 7, Item 5) from frame (Figure 7, Item 9).
Figure 7. Secondary Steering Relay.
0187
END OF TASK
CLEANING AND INSPECTION
000187
1. Clean and inspect all mechanical components IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical components IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK
INSTALLATION
000187
N OT E
Install wires as tagged during removal.
Install washers as noted during removal.
1. Install secondary steering relay (Figure 7, Item 5), two clips (Figure 7, Item 6), four washers (Figure 7, Item 7),
and bolts (Figure 7, Item 8) on frame (Figure 7, Item 9).
2. Install two new lockwashers (Figure 7, Item 3), eyelets (Figure 7, Item 4), washers (Figure 7, Item 2), and nuts
(Figure 7, Item 1) on secondary steering relay (Figure 7, Item 5).